Some common problems encountered when using the oil drain plug!
Drain plugs with larger specifications are generally oil drain plugs or hexagonal oil drain plugs. We all know that oil drain plugs have many functions. No matter how good the fasteners have been used for a long time, they may loosen. Let's talk about some common problems encountered when using drain plugs.
1. Cylinder head oil drain plug
The oil drain plug is used for tightening, and it is often subject to vibration and vibration when installed on the machine, so some oil drain plugs may loosen. In order to avoid this phenomenon, we will use some anti-loosening treatment. There are many ways to prevent loosening:
(1) It is more common to add a suitable spring washer between the oil drain plug and the workpiece. The function of the spring washer is to increase the pressure through the rebound force, which can greatly increase the anti-loosening effect of the oil drain plug.
(2) Do drop-resistant glue at the end of the oil drain plug thread. This anti-loosening method is used more on small oil drain plugs. It is attached to the threaded surface, and the thickness is very thin, and it can play a good anti-loosening effect after tightening with the threaded hole.
(3) If the oil drain plug is used in a place that does not need to be disassembled, the oil drain plug can be welded to the installation place after the oil drain plug is installed, which can play a very good anti-loosening effect, but the oil drain plug used in this way cannot be used. Disassemble and use again.




